English На русском Ўзбекча

Технический каталог

Download technical catalog

News:

  • Реализация социального проекта установки солнечных электростанций в отдаленных кишлаках

    от (3:44 PM, 07/07/2017)
    Реализация социального проекта установки солнечных...read more
  • 2016 йил якунлари бўйича чоп этилган ҳисобот.

    от (3:35 PM, 07/07/2017)
    2016 йил якунлари бўйича чоп этилган ҳисобот.read more
  • Опубликована отчётность по итогам 2016 года

    от (3:33 PM, 07/07/2017)
    Опубликована отчетность по итогам 2016 года. read more

Subscribe to news by e-mail:

Search:

    Share this page:

Auxiliary circuit switching devices of KSAM series

KSAM series switching devices of auxiliary circuits are intended for the use as embedded components of auxiliary electric circuits of high-voltage drives: disconnectors, grounding conductors, separators, and short circuiting switches.

Auxiliary circuit switching devices of KSAM series

KSAM type switching devices are designed for switching of auxiliary electric circuits with an alternating current voltage of 380 V and frequency of 50 and 60 Hz as well as direct current voltage of 220 V.

Climatic category of the terminals and terminal blocks is UKhL (temperate and cold weather) and T (tropical weather) (respectively, NF and T according to IEC); placement category is 3 according to GOST 15150.

The switching devices embedded in the shell of IP54 protection rating according to GOST 14254-96 are applicable in the reference conditions for devices of climatic category UKhL and T (respectively, NF and T according to IEC) and placement category of 3 according to GOST 15150.

Examples of the designation of the device when placing an order and in the documents of other products are as follows:

  1. “Switching device KSAM 11-21-11304-UKhL3, according to the Corporate Standard Ts 00212883-015:2014”;
  2. “Switching device KSAM 11-21-11304-T3, export, according to the Corporate Standard Ts 00212883-015:2014”.

Engineering data:

Parameter name
Value
Rated AC voltage of 50/60 Hz frequency, V
380
Rated DC voltage, V
220
Rated current, A
10
Maximum permissible rate of cycles per hour
300
Number of stand-alone switching circuits, pcs.
2; 4; 6; 8; 12
Shaft rotation angle
90°; 120°
Availability of additional devices for the connection to the drive
there no additional devices
disc
disc with a 69-mm long lever
disc with a 123-mm long lever
Electrical shock hazard protection class according to GOST 12.2.007.0
0
Mechanical wear-resistance. Number of switch-overs from one end position to another, no less than, times
20,000

Made in accordance with the Corporate Standard Ts 00212883-015:2014.

The product has been certified by the National Certification System of the Republic of Uzbekistan and Certification System of the Russian Federation (GOST-R).